Macbook Ssd Not Recognized

Before doing something as drastic as replacing a MacBook Air's SSD, it pays to confirm the drive is actually damaged and unrepairable. Run Apple's Disk Utility for a start. If that fails, try. No Apple won't give you the old SSD back. But, they will test it and can try to restore the data. Often the SSD is to far gone to recover anything. Have you made any backups? I have a different issue - my Samsung SSD was detected via external SATA/USB plus. It allowed me to format it, even install fresh OS, but as soon as I swapped it with my old HDD on my early 2011 Mac, the only drive recognizable by system was a Recovery drive. Mac does not detect my SSD.

• Macbook Ssd Drive
• Installed New Ssd Not Recognized
• M2 Ssd Not Recognized
• Macbook Ssd Not Recognized Without

For almost a year i've been using my Samsung Portable SSD t5 (500 GB). But now it stopped working. It's not recognized by my Macbook Pro and some other mac and windows computer i've tried it on. The blue light next to the usb connector is on though. Already reinstalled the 'samsungportablessd' software and updated it to the latest version. By default, Mac OS, unlike Windows, doesn't automatically enable the TRIM command for a self-installed SSD. (If your Mac comes with an SSD, TRIM will already be enabled.) TRIM allows the operating.

Mac Won't Recognize USB, What Should You Do?

Commonly, when you insert a USB drive in the USB port on a Mac computer, the drive will soon appear on the desktop or hide in the Finder, letting you access, view, and manage data on it. Did you come across the situation that no matter how many times you try to connect the USB drive with a Mac computer, the USB drive is not showing up anywhere? Why this time Mac won't recognize a connected USB you may wonder. Though not a usual thing, the issue of an external hard drive or flash drive not showing up on Mac happens sometimes. What should you do in this circumstance? What are the effective solutions to make your USB drive show up again?

This page basically covers all the possible fixes for USB not showing up on Mac, which also applies to the similar issues of other storage devices like an external hard drive not showing up on Mac, flash drive not showing up on Mac, SD card not showing up on Mac, etc. Take a quick glance at the main content and directly jump to the part you're most interested in.

10 Fixes for USB Not Showing Up on Mac

The reasons behind the problem of a USB device not showing up are various, including the USB port is not working, USB drive corruption, virus infection, macOS faulty, etc. So, to figure out the effective solutions for your own case, you need to take time to have some basic check, exclude the irrelevant issues, identify the potential risk, and finally solve it!

Fix 1. Change the USB-to-Mac connection way

Have you tried to restart your Mac once or twice? Before taking further measures, don't forget the most efficient way to tackle commonplace hardware glitches that arises from time to time. If this operating system restarting fails to solve the current problem, move on to check the physical connectivity issue step by step.

Step 1. Plug the USB drive out from the not working USB port and change to the other USB port. Try all the available USB ports on your Mac.

Step 2. Did you use a USB connection cable or a USB-C adapter? If yes, take the USB drive out, and directly plug it in the USB port.

Step 3. Is there the other Mac computer available to you? If yes, try to connect the USB drive to this computer. Is it showing up normally?

Step 4. For SD card owners, the common way to connect an SD card to a Mac needs a card reader. If changing the USB ports did not work, try to change a card reader for a new round of tests.

The four steps of troubleshooting a USB drive not showing up on Mac are very basic, however, quite helpful in most cases. Each step can help us exclude the issues of a bad/loose connection, a not working USB port, a lack of power, and other superficial phenomenons.

Fix 2. Change settings for Mac detecting an external hard disk on the desktop

Occasionally, your Mac has already recognized the USB flash drive but not shown it on the desktop. Thus, you should go to Finder > Preferences > General and make sure the 'External disks' option is ticked. Then you'll see the USB flash drive showing up on Mac desktop.

Macbook Ssd Drive

Fix 3. Change settings for Mac recognize an external hard disk in the Finder

Finder is the other access for us to check a connected external drive on Mac. If your flash drive or external hard drive is not showing up there, go to Finder > Preferences > Sidebar, and under Locations, you need to tick the option 'External disks'. By selecting this option, we can make sure that the connected external USB hard drive or flash drive will normally show up in the Finder.

Fix 4. Check the USB drive in System Information

When you cannot find the USB drive on the desktop or in the Finder, try to look for it in the System Information section, which is usually a hidden place for average Mac users.

Step 1. Go to Applications > Utilities > System Information.

Step 2. Check if the system detects the USB drive. Click 'USB' on the left panel, and you can also check the USB flash drive information.

Fix 5. Reset USB ports on Mac to detect a USB drive

Step 1. Restart Mac computer, press the Command +Option+P+R keys until the Apple logo appears.

Step 2. Press Command+Option+Esc keys to close all applications that are not responding.

Step 3. Plug the USB which is not showing up to your Mac computer. If it doesn't show up, click Apple icon and select 'Sleep'.

Step 4. Wake up the computer after a few seconds by pressing any key.

Step 5. Shut down the Mac, unplug the power cord, reattach it after 15 seconds.

If this doesn't work, we should suspect the corruption issue at this moment. Don't give up and try to do some repair by yourself.

Installed New Ssd Not Recognized

Fix 6. Repair USB flash drive with First Aid if it doesn't show up

Step 1. Go to Applications > Utilities > Disk Utility.

1. Step 2. Select USB flash drive on the left panel of Disk Utility, and click 'First Aid' at the top toolbar and click 'Run'. Disk Utility will repair any errors on the drive automatically.

Step 3. Select the USB drive and click 'Unmount' at the top toolbar, unplug the USB and plug it back in 10-15 seconds.

Fix 7. Check and fix errors in a not recognized USB with Terminal

Step 1. Open Terminal in Utilities, type:diskutil list and press Return.

Step 2. Find the disk number of your USB flash drive, type: diskutil info disk2 and press Return. (Replace 2 with the disk number of your USB flash drive.)

Step 3. Type: diskutil eject disk 2 and press Return.

Step 4. Type: diskutil list and press Return.When the USB disappear from the Terminal list, close the window.

Step 5. Close Terminal and open Console to inspect your drive errors.

Step 6. Click 'Errors and Faults' to check if there are any errors.

Step 7. Reconnect your USB flash drive back to Mac, if no error shows up, your USB flash drive is safe.

Fix 8. Save data and reformat the not showing USB drive

Disk reformatting basically solves many hard drive issues, including the not showing up USB, particularly the time when you are able to see the USB icon but files are not showing. USB drive showing empty makes no sense, so you have to reformat the disk and make it usable again.

Note that reformatting will erase data. Macbook music recording software. As long as the data matters, you need to follow the standard procedure to ensure zero data loss. [1] Download EaseUS Data Recovery Wizard for Mac, the professional Mac data recovery software, to perform a full USB drive data recovery. [2] Reformat the USB drive in Disk Utility.

To format the USB drive in Disk Utility:

Step 1. Go to Utilities and open Disk Utility.

Step 2. Select the not showing up USB flash drive in the Disk Utility sidebar.

Step 3. Click Erase on the top.

Step 4. Finish the necessary information (name, format, and scheme) to format the USB flash drive.

Fix 9. Update your macOS and firmware

Did your Mac's OS keep updating all the time? Chances are that your Mac won't recognize a USB drive, especially after a macOS update. This time, take a close look at the settings whether your Mac is up-to-date. Equally, firmware updates address a variety of hardware issues and the functionality of the USB ports could well be one of them. So, keep your software and firmware up to date will likely make the USB drive show up as normal again.

Fix 10. Send the USB drive to a repair center

Nowadays even the branded USB flash drives are not expensive. If you've tried all the suggested troubleshooting methods, the USB drive is still not showing up on Mac, you have to accept the truth that it's severely damaged and beyond your ability to repair it.

Mac won't recognize a badly damaged flash drive or external hard drive since there is no way to show it up, even temporarily, which makes the data recovery difficult. The last chance for you to rescue data is to send the broken USB drive to a specialized data recovery service center nearby, and let the professionals try their best. You need to prepare for the manual data recovery cost, which is noticeably higher than the software data recovery. Hence, always try the cost-effective plan of using EaseUS Data Recovery Wizard to scan the USB drive for the first attempt.

Step 1. Correctly connect your USB flash drive to your Mac. Launch EaseUS Data Recovery Wizard for Mac. Start selecting the flash drive and click 'Scan' to let the software search lost files on it.

Step 2. After a quick scan and deep scan, all files will be presented in the left panel in the scan results.

Step 3. Select files you want to recover and click the 'Recover Now' button. Don't save the recoverable files to the USB drive itself in case of data overwriting.

Take Action to Make Your USB Recognized Again

On this page, we collected 10 practical fixes for you to repair not recognized USB drive. Don't worry if your USB or USB flash drive is not showing up on Mac.

Just pick up one of the listed methods and follow the guide steps to make your drive showing up and accessible again.

And don't forget to run EaseUS Data Recovery Wizard for Mac to scan and find all your USB data after fixing this issue.

ATA/SATA Hard Drive Not Detected in BIOS, Help!

'Hi there, have you ever met this problem that the hard drive suddenly cannot be detected in PC? I'm now having this problem that my computer cannot detect the second hard drive in my PC. My friend helps me to check the hard drive in BIOS, but no information on the hard drive is showing up. This is so strange. Is it damaged? What can I do? I still need the drive. And do you have any methods to fix this problem? Please help me if you do know any solutions, thanks.'

M2 Ssd Not Recognized

Are you having a similar problem with your hard drive? Don't worry if your ATA or SATA hard drive cannot be recognized by BIOS or PC anymore. Just follow quick fixes and effective solutions here to fix and repair ATA/SATA not detected/recognized in BIOS error and make it show up in PC and work again now.

Quick Fix 1. Connect ATA/SATA Hard Drive with Another Cable Port

Sometimes, when the hard drive data cable gets loose, the drive may not be recognized or detected by PC. Therefore, you can try below two ways to make computer detect and read your ATA or SATA hard drive right away:

1. 1. Reconnect the hard drive with the data cable port or connect ATA/SATA hard drive to another new data cable in PC;
2. 2. Connect the hard drive with another desktop/laptop as a second HDD;

After this, if the computer can read and detect your ATA or SATA hard drive, then the problem has been solved. If not, don't worry. Try other solutions below to solve your problem now.

Quick Fix 2. Turn on and Enable ATA or SATA Hard Drive in BIOS

If your hard drive is a new disk and connected as a second drive in PC, it won't be recognized by PC till you enable it in BIOS:

Macbook Ssd Not Recognized Without

• Shut down PC and unplug data cable from hard drive properly;
• Reconnect the hard drive with data cable;
• Restart PC and press F2 to enterBIOS;
• EnterSetup and check system documentation to see whether the not detected hard drive is turned Off in System Setup or not;
• If it's Off, turn it ON in System Setup.
• Reboot PC to check out and find your hard drive now.

Don't worry if your problem is still unsolved. Continue to follow below 3 methods to get your problem solved now.

Method 1. Update Hard Drive Drivers to Make ATA/SATA Hard Drive Detectable

If hard drive device drivers are outdated, the computer won't be able to run a hard drive nor read data on it. You can try below three offered options to get update hard drive drivers now:

1. 1. Contact hard drive manufacturer for help and update hard drive drivers;
2. 2. Download and update hard drive driver from manufacturer's website;
3. 3. Manually update hard drive device drivers in Windows system:

• Click 'Start' button > Type: Device Manager and hit Enter;
• Select Device Manager, expand categories to find the name of your hard drive and right-click it;
• Select 'Update Driver' > select 'Search automatically for updated driver software';
• If Windows doesn't find a new driver for your drive, find the latest one on the device manufacturer's website;
• If the above steps don't work, try re-installing the drivers: OpenDevice Manager> Right-click on your hard drive and select 'Uninstall';
• Then restart PC and Windows will automatically re-install the drivers on the hard drive for you.

After this, remember to reboot PC and keep changes in PC and hard drive.

Method 2. Initialize ATA/SATA Hard Drive to Make It Detectable

When hard drive especially new hard drive doesn't get initialized, it is unusable for users to install programs or save data. If you don't know how to initialize hard drive, never mind, professional partition manager software - EaseUS Partition Master will help you do the job for free.

You can directly free download this software and follow the tutorial article: how to initialize a hard drive/SSD in Windows 10/8/7 and then make your hard drive detectable in BIOS and PC.

Method 3. Check Drive Spinning up or Not

1. 1. Turn off the PC and open the computer case to remove data cable from the hard drive;
2. 2. Reconnect the drive with data cable and restart PC;
3. 3. Check out whether the drive is spinning or not;
4. 4. If not, try to disconnect and reconnect the power cord on the computer and hard drive, repeat till the hard drive spin up;
5. 5. It still doesn't work, try to repeat these steps with another new PC;
6. 6. Or try to connect the drive in a SATA-USB enclosure or similar device;
7. 7. Or you can even get a warranty replacement order from hard drive manufacturer to see if it works or not.

Extra Tip: Format ATA/SATA Hard Drive to Make It Usable for Storing Data

If you still cannot use ATA or SATA hard drive for saving data, you can format the hard drive in your PC to make it usable for saving data now:

1. Enter Disk Management tool by right-clicking 'This PC/My Computer' and select 'Manage';
2. Click Disk Management in Device Manager, right-click on ATA or SATA hard drive partitions and select 'Format volume' or 'Delete volume' to reset hard drive to save data again.